Skip to content
WhatsApp
Request a Quote
Nuts · MS21059 and NASM25027

A2 (304) Stainless Steel Aerospace Two-Lug Floating Self-Locking Nutplates

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A2 Stainless Steel Aerospace Two-Lug Floating Self-Locking Nutplates are supplied to ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70. Corrosion behaviour is good general corrosion resistance, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is the most common stainless group for indoor and general outdoor fasteners.

Grade
ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70
Corrosion resistance
Good general corrosion resistance
Magnetic response
Largely non-magnetic
Service temperature
approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

A2 (304) Stainless Steel Aerospace Two-Lug Floating Self-Locking Nutplates reference image

Material specification page for aerospace two-lug floating self-locking nutplates in A2 Stainless Steel. Covers the grade designation (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to MS21059 and NASM25027.

Why Choose A2 Stainless Steel for Aerospace Two-Lug Floating Self-Locking Nutplates

The most common stainless group for indoor and general outdoor fasteners. For aerospace two-lug floating self-locking nutplates, this matters when good general corrosion resistance is the primary requirement.

Mechanical & Physical Properties

Grade designationISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70
Magnetic responseLargely non-magnetic
Service temperatureapprox. -200 °C to +400 °C, subject to the property class and the joint
Corrosion characteristicGood general corrosion resistance

Corrosion Behavior in Service

A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Aerospace Two-Lug Floating Self-Locking Nutplates in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).

Comparable Grades

For Aerospace Two-Lug Floating Self-Locking Nutplates, the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.

Using Stainless Fasteners in Aluminum

Stainless steel is more noble than aluminum, so in the presence of an electrolyte — rain, condensation, salt spray — the aluminum becomes the anode and corrodes at the joint. The effect is driven by the area ratio: a small stainless fastener in a large aluminum section is normally acceptable, while a large stainless fastener in thin aluminum is not. Where the joint is wet, isolate the two metals with a coated or nylon washer and a sealant, or specify an aluminum or coated fastener instead.

Sizes of Aerospace Two-Lug Floating Self-Locking Nutplates Available in A2 Stainless Steel

Thread sizeOverall length A (in)Width B (in)Mounting-hole spacing J (in)Nut height (in)Material optionsReference standard
4-400.9480.4160.6880.175cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
6-320.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
8-320.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
10-320.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
1/4-280.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
5/16-240.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
3/8-240.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (MS21059 and NASM25027)

Thread sizeOverall length A (in)Width B (in)Mounting-hole spacing J (in)Nut height (in)Material optionsReference standard
4-400.9480.4160.6880.175cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
6-320.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
8-320.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
10-320.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
1/4-280.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
5/16-240.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027
3/8-240.948~1.2920.416~0.6800.688~1.0000.175~0.344cadmium-plated alloy steel or stainless steelMS21059 and NASM25027

Applications & Industries

Where Aerospace Two-Lug Floating Self-Locking Nutplates are used, and what decides the specification in each case. Stocked from 4-40 to 3/8-24 (screw size).

Industries that specify Aerospace Two-Lug Floating Self-Locking Nutplates

  • Aerospace access panels Two-lug floating nutplates that absorb accumulated panel-hole tolerance.
  • Aircraft interiors Removable trim and equipment panels with many closely spaced fixings.
  • Avionics enclosures Self-locking captive threads installed behind a finished panel.
  • Motorsport bodywork Lightweight panels removed and refitted without losing the nut.
  • Building services Threaded rod, channel and suspension assemblies.
  • Machine building & OEM The clamping counter-face on studs and bolts throughout an assembly.

Typical applications

  • providing a self-locking thread that floats between two riveted lugs
  • absorbing two-axis hole-position variation across a panel
  • keeping the nut captive when the screw is removed
  • selecting overall length, width, spacing and nut height from MS21059
  • joints re-torqued at a service interval
  • completing a bolted joint on a stud, rod or bolt

Service conditions to specify against

Marine and coastal
Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
High load
Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
Vibration
Specified where cyclic load would loosen a plain nut or screw — rotating plant, rail, mobile equipment and anything that is not re-torqued in service.
Match the class
A nut below the bolt property class strips before the bolt reaches its own limit — pair class 8 nuts with 8.8 bolts, class 10 with 10.9.

Where to use something else

  • Do not treat the float as permission to ignore the specified rivet-hole spacing or thread engagement.

Full application guide: where Aerospace Two-Lug Floating Self-Locking Nutplates are used, how to specify them, and the cases they are wrong for

Inside the plant

Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

  1. Wire rod feeding into a cold heading machine
    01

    Cold heading

    Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.

    Head dimensions and under-head radius checked at set-up and per shift.

  2. Thread rolling machine producing bolt threads
    02

    Thread rolling

    Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.

    Go / no-go ring gauges to ISO 965 tolerance class 6g.

  3. Baskets of bolts staged for heat treatment
    03

    Heat treatment

    Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.

    Core hardness and tensile tested per lot to ISO 898-1.

  4. Zinc plated bolts in a treatment basket
    04

    Surface treatment

    Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.

    Coating thickness and neutral salt spray hours to ISO 9227.

Frequently Asked Questions

Is A2 Stainless Steel food-grade?

A2 (304) is widely accepted for food contact in non-chloride environments; A4 (316) is preferred where chlorides are present.

Can A2 Stainless Steel Aerospace Two-Lug Floating Self-Locking Nutplates be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

What's the service temperature limit for A2 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

Can A2 Stainless Steel replace plated alloy steel structurally?

Only at the standard strength classes — A2-70 / A4-80 are roughly equivalent to class 7 steel; A4-100 reaches class 8.8. For class 10.9 or 12.9 strength, plated alloy steel is required.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.