Skip to content
WhatsApp
Request a Quote
Nuts · Full-Hex Rivet Nuts

Full-Hex Open-End Blind Rivet Nuts

5 catalogued sizes, dimensioned to Trade series (full-hex open-end blind rivet nuts). Pick any row and the technical drawing redraws to it.

Full-Hex Open-End Blind Rivet Nuts to Trade series (full-hex open-end blind rivet nuts) are catalogued in sizes M4 to M10, with pitch 0.7-1.5 mm, dia 9-18 mm. 5 sizes are held in the table below, and the technical drawing redraws to whichever row you select.

Standard
Trade series (full-hex open-end blind rivet nuts)
Size range
M4-M10
Pitch
0.7-1.5 mm
Dia
9-18 mm
Catalogued sizes
5

Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.

Full-Hex Open-End Blind Rivet Nuts technical product image

Applications & Industries

Where Full-Hex Open-End Blind Rivet Nuts are used, and what decides the specification in each case. Stocked from M4 to M10.

Industries that specify Full-Hex Open-End Blind Rivet Nuts

  • Trailer manufacturing High-torque blind threads in rails and box sections.
  • Electrical enclosures Removable covers attached to thin steel or aluminum sheet.
  • Solar equipment Serviceable bracket threads in thin profiles and formed frames.
  • Industrial machinery Blind mounting points where the full-hex body must resist spin.
  • Building services Threaded rod, channel and suspension assemblies.
  • Machine building & OEM The clamping counter-face on studs and bolts throughout an assembly.

Typical applications

  • resisting insert rotation with a full-hex body in the installation hole
  • providing a reusable open thread without access to the back face
  • specifying hole diameter, grip range and torque resistance together
  • installing a threaded point after a panel or tube is closed
  • completing a bolted joint on a stud, rod or bolt
  • locking an adjustment so it cannot drift

Service conditions to specify against

Marine and coastal
Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
High load
Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
Match the class
A nut below the bolt property class strips before the bolt reaches its own limit — pair class 8 nuts with 8.8 bolts, class 10 with 10.9.

Where to use something else

  • Do not use the typical torque resistance as a substitute for the parent-sheet grip and hole limits.

Full application guide: where Full-Hex Open-End Blind Rivet Nuts are used, how to specify them, and the cases they are wrong for

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quotation for Full-Hex Open-End Blind Rivet Nuts

The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (Trade series (full-hex open-end blind rivet nuts))

Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.

Thread sizePitch (mm)Grip ranges (mm)Installation hole (mm)Flange diameter (mm)Typical torque resistance (Nu00b7m)Material options
M40.70.5~2.06.09.04steel or aluminum alloy
M50.80.5~2.5 / 2.5~5.07.010.06.5steel or aluminum alloy
M61.00.5~3.0 / 3.0~5.59.012.712steel or aluminum alloy
M81.251.0~3.5 / 3.5~5.511.016.031steel or aluminum alloy
M101.51.0~3.5 / 3.5~6.012.018.042steel or aluminum alloy

Full-Hex Open-End Blind Rivet Nuts are nuts manufactured to Trade series (full-hex open-end blind rivet nuts). This page lists the full dimensional range with the key specifications engineers need to select and specify them.

What Are Full-Hex Open-End Blind Rivet Nuts?

Full-Hex Open-End Blind Rivet Nuts are nuts defined by Trade series (full-hex open-end blind rivet nuts). They are selected by thread size and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.

Materials & Finishes

Common materials include carbon steel (typically zinc plated or hot-dip galvanized), alloy steel in property classes 8.8, 10.9 and 12.9, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, property class and surface finish appropriate to your load and environment.

Pricing

Full-Hex Open-End Blind Rivet Nuts are supplied to order. Pricing starts from approximately US$0.13 per piece for standard sizes in carbon steel; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.

Inside the plant

Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

  1. Wire rod feeding into a cold heading machine
    01

    Cold heading

    Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.

    Head dimensions and under-head radius checked at set-up and per shift.

  2. Thread rolling machine producing bolt threads
    02

    Thread rolling

    Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.

    Go / no-go ring gauges to ISO 965 tolerance class 6g.

  3. Baskets of bolts staged for heat treatment
    03

    Heat treatment

    Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.

    Core hardness and tensile tested per lot to ISO 898-1.

  4. Zinc plated bolts in a treatment basket
    04

    Surface treatment

    Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.

    Coating thickness and neutral salt spray hours to ISO 9227.

Frequently Asked Questions

What standard are Full-Hex Open-End Blind Rivet Nuts manufactured to?

Full-Hex Open-End Blind Rivet Nuts are manufactured to Trade series (full-hex open-end blind rivet nuts). The dimensional values on this page follow that standard.

What sizes are available for Full-Hex Open-End Blind Rivet Nuts?

The table on this page lists 5 sizes for Full-Hex Open-End Blind Rivet Nuts, ranging from M4 to M10. Sizes outside the table can be quoted on request.

In which materials are Full-Hex Open-End Blind Rivet Nuts supplied?

Full-Hex Open-End Blind Rivet Nuts are supplied in matching property-class steel and stainless A2 / A4, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Full-Hex Open-End Blind Rivet Nuts.

How do I request a quotation?

Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.